Gas detector

Product Details:

Applications

For continuous monitoring of small scale equipment at university and research institutes etc.

Features

• Easy to monitor over 20 gases simply by changing a plug and play sensor.
• Maintenance free
• Portable and fkexible
• NF₃ monitoring is available. (model specify)

Specifications List of detectable gases

Additional Information:

• Production Capacity: 100

Product Details:

FEATURES:

Smaller and Lighter

Attained 50% reduction in volume and 30% reduction in weight

from the conventional models.

Easy-to-See LCD Display

Easy-to-see LCD with a display of battery life and sound effect settings

of alarm and operation. 

Two-Alarm Lamps

Easy to notice the alarm by flashing 2 alarm lamps at hand.

Trace Gas is Detectable

As little as 10 ppm can be detected. (30ppm for Freon gas)

Capable of Detecting 2 Gases

 

 

(Target models: XP-702III-A, XP-702III-F)

TARGET GAS

CFC :R22, R32, R404A, R407C, R600a(i-B), 410A, R134a, etc

Combustible Gas: Methane, Iso-Butane, Hydrogen, Ammonia, Propane, Benzene, Acetylene, EO, Ethylene, Propylene, Ethan, Butadiene, Dichloroethane, etc.

Additional Information:

• Production Capacity: 100
• Delivery Time: 4 to 6 week

Product Details:

Features:-
1. For measurement of a combustible gas concentration of 0-10/0-100% LEL.
2. Suitable for monitoring a risk of explosion.
3. New digital display with a simulated analog scale.
4. Built-in correction factors for up to 5 flammable gases.(factory option)

Model: XP-3110

Approval: ATEX,CE,UL,PESO etc.
Please make your specification by filling in the type of gas.
Ex: Methane, Isobutane, Propane, H2, Acetylene, Gasoline, Ethanol, LPG, etc, etc

Model Overview:

Gas Detected: Combustible gases and vapors
Sampling Method: Suction Type (Extractive)
Detection Range :0-100%LEL
Operating Temp. :-20 to 50⁰C
Explosion-Proof :Exhibit II Bt3
Power Source :4X AA alkaline dry cells
Battery Life :Up to 20 hour
Weight :Approx. 450g (excluding batteries)

Product Details:

Features:-

1.Can detect trace amounts of various semiconductor manufacturing gases.

2. Automatic stop pump function

3.Automatic gas exhaust mode

4.Equivalent to IP22 (in soft case)

Model: XP-703D III

Please make your specification by filling in the type of gas.
Ex: H2, AsH3, B2H6, SiH4,PH3

Model Overview:

• Detectable Leak Rate : H2: 5.07 × 10-7, AsH3: 2.53 × 10-7, B2H6: 1.01 × 10-7, SiH4: 2.53 × 10-7, PH3:1.52 × 10-7
• Detectable gas Conc. :H2: 1.0ppm, AsH3: 0.5ppm, B2H6: 0.2ppm, SiH4: 0.5ppm, PH3: 0.3ppm
• Sampling Method :Suction Type (Extracitive)
• Response Time :10 sec
• Operating Temp. :10 to 40⁰C
• Power Source :2X AA alkaline dry cells
• Battery Life :Up to 12 hour
• Weight :Approx. 190g (excluding batteries)

Additional Information:

• Production Capacity: 200
• Delivery Time: 4 to 06 week

Product Details:

Features:-

1. For measurement of combustible and Toxic gas concentration of 0-500 PPM.
2. Suitable for monitoring a risk of explosion.
3. New digital display with a simulated analog scale.
4. Built-in correction factors for up to 5 flammable gases.(factory option)

Model:XP-3160

Approval: ATEX,CE,UL,PESO etc.
Please make your specification by filling in the type of gas.
Ex: Methane, Isobutane, Propane, H2, Acetylene, Gasoline, Ethanol, LPG, etc, etc

Product Details:

Application:

For controlling the odor of various factory sites, exhaust vents, equipment odors, indoor environmental monitors, deodorizers and air purifiers.

Features:

• A multi-point odor monitor that visualizes the strength of odors and continuously monitors them.
• Realizes continuous monitoring that was impossible with sensory testing and instrumental analysis.
• Cases are available in standard 3, 6, 9, 12 points.
• Equipped with an external output terminal capable of continuous recording.
• Odor level is displayed in real time with a digital bar graph.
• The sampling panel can be used to monitor odors in a wide range of applications and harsh environments (optional).

Additional Information:

• Production Capacity: 100

Product Details:

Application

Underground parking lot.
For prevent carbon monoxide poisoning.
Research facilities .
Iron plant etc etc.

Additional Information:

• Production Capacity: 200
• Delivery Time: 4 to 6 week

Product Details:

Suction type gas detector 
Approval:

1. ATEX    
2. PESO

Additional Information:

• Production Capacity: 100
• Delivery Time: 6 week